SW-910 END GRAIN SEALER

  • Next day delivery on paint orders if ordered before 11.00am (excepting special colours).
  • FREE Delivery on paint orders over 60Lts with the exception of certain postcode addresses.
  • Same day despatch on orders placed before 11am.

SW-910 END GRAIN SEALER

Sealer for End Grain to Timber

Full description

Remmers Induline SW-910 is used to treat and seal end-grain surfaces in Timber substrates in wood and wood working materials.

Remmers Induline SW-910 is used after the wood has been primed or basestained. The product is ready to use and is applied by brush or roller. Further coating of surfaces can be carried out without intermediate sanding. Permissible wood moisture for soft wood is 15% and for hardwood 12%. Do not use in direct sunlight or at temperatures below +15 °C or above +30 °C. Surfaces treated with Induline SW-910 must be protected with a further coating. Intermediate and finishing coats can be executed as usual with water based, thick-layer translucent coatings or finishing paints.

Sizes: 2.5Lts

Remmers Induline SW-910 Technical Data Sheet

Remmers Induline SW-910 Material Safety Data Sheet

Delivery

Coatings & Sundries - £9.95 on orders up to 60 Lts. Free delivery on orders over 60Lts - UK Mainland Only (Selected postcodes)

Profiles for Cladding - £54 for profiles shipped without cladding. These are shipped inside a tube for protection during transit - UK Mainland Only


Cladding - £145.20 - £206.40 per pallet of 250 boards - UK Mainland Only.

Please Call 01623 634281 when placing orders for cladding as delivery charges vary.

From £30.67