|
Home
Sikkens Joinery Products &PDF's
Sikkens Interior
Opaque Brushables
Flame Retardant's
Services
Cladding Products
Links
Project Images
| |
Operational equipment set up & advice.
Key Benefits.
-
All Joinery shops and working environments encountered
in the last 26 years are different and require inputs from both the product
manufacturer (workshop) and the equipment installer to achieve a
workable and efficient product finish ready for the client or market.
-
We provide advice on the type of Spray machinery
required to spray finish the components manufactured, after initial
consultation into your requirements.
-
Professional advice on the type of Drying equipment
required to help achieve a faster production
without compromising the quality Sikkens Finish.
-
Effective and easy handling of wet/drying
components is paramount when finishing joinery, we will help design and
install if required the tracking equipment needed to suit your premises.
-
Dipping is
a very effective way to base prime or stain components, we will help
you overcome some fundamental steps in this process.
-
Saturation spray of components needs certain criterion
to enable the manufacturer to successfully base stain or opaque prime the
components, we have the techniques to help set up this procedure.
-
Brushing Sikkens water-borne products
are simple and
very cost effective and far out way the Oil bound equivalents. We have been
applying the Sikkens products now since 1979 with vast experience and
knowledge of these coatings.
Contact Information: Tel: 00 44 (0)1623 632481
Fax:00 44 (0)1623 634282
Email:
enquiries@environmentalcoatings.co.uk
COPYRIGHT © 2006
ALL RIGHTS RESERVED Environmental Coatings (U.K.) Ltd.
|